neatly wiring reverse mounted subs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97836
Printed Date: May 15, 2025 at 3:33 PM

Topic: neatly wiring reverse mounted subs

Posted By: oldguy517
Subject: neatly wiring reverse mounted subs
Date Posted: October 10, 2007 at 11:18 AM

What are some techniques for keeping the wiring neat when reverse mounting subs? I don't want to have wires draped everywhere, and possibly being a hazard. I would just mount them normally, but, big port hole + long subwoofer = no fit.

Replies:

Posted By: DYohn
Date Posted: October 10, 2007 at 11:42 AM

Cable management is limited only by your creativity and imagination. Me, I like to simply use plastic zip ties. Others like to use expandable sleeving or raceways or even shrink tubing. Use whatever works for your installation.

-------------
Support the12volt.com

Posted By: sarcomax
Date Posted: October 10, 2007 at 1:54 PM

Big zip tie to keep it close to the woofer, split loom for the run down into the box.

-------------

Posted By: haemphyst
Date Posted: October 10, 2007 at 3:35 PM

About 2/3's of the way down in this page is how I did mine. Seems to work like a finger in a nose!

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Print Page | Close Window