Power wire through firewall 4 - 93 / 626

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9787
Printed Date: July 06, 2025 at 5:07 AM

Topic: Power wire through firewall 4 - 93 / 626

Posted By: thepencil
Subject: Power wire through firewall 4 - 93 / 626
Date Posted: February 20, 2003 at 10:22 AM

I would like to run a power wire through the firewall of a 1993 Mazda 626. If anyone has done this recently please let me know which coner area is the easiest to fish it through. Is there any panel I need to remove from the inside to get the wire through? Thanks you in advance.

Replies:

Posted By: IronCy
Date Posted: February 20, 2003 at 11:53 AM

find a factory gromet and run it through with the factory wiring. Or drill your own hole and install your own gromet.

-Cy

Posted By: thepencil
Date Posted: February 20, 2003 at 12:59 PM

Thanks CY for your reply, but I am looking for a more specific answer to my question.(eg.top left coner,lower left coner...where ever it is) I have done many Honda cars, but never on a 626. I don't want to be poking for holes on a trial and error bases and short out something. If anyone can help me out I would really appreciated. Thanks.

p.n.

Print Page | Close Window