profile california 2400 amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97919
Printed Date: May 02, 2025 at 7:05 PM

Topic: profile california 2400 amp

Posted By: skooterz
Subject: profile california 2400 amp
Date Posted: October 12, 2007 at 11:18 PM

Does anyone have info on this amp? It is a california 2400 model that says 400 watts, and bridgable. Is this a 2 ohm stable amp? any info would be great.

Replies:

Posted By: skooterz
Date Posted: October 13, 2007 at 8:30 AM

anyone have any info out there?

Posted By: DYohn
Date Posted: October 13, 2007 at 9:33 AM

skooterz wrote:

this a 2 ohm stable amp?

No it's not. Indeed I think it's only 2X4-ohms rated, which means if you want to bridge it you need to use an 8-ohm load. And it might put out 400 watts for 1/10 of a second just before it bursts into flames. Profile California amps are pretty poor quality.

-------------
Support the12volt.com

Posted By: skooterz
Date Posted: October 13, 2007 at 9:58 AM

what will this amp do with just (2) 10" 4ohm subs? mabey 100watts each?

Posted By: DYohn
Date Posted: October 13, 2007 at 10:30 AM

skooterz wrote:

what will this amp do with just (2) 10" 4ohm subs? mabey 100watts each?

Maybe.

-------------
Support the12volt.com

Posted By: soultinter
Date Posted: October 13, 2007 at 10:49 AM

I'm confused, does it say 2400 or 400?

Posted By: DYohn
Date Posted: October 13, 2007 at 11:17 AM

soultinter wrote:

I'm confused, does it say 2400 or 400?

The Profile California 2400 is rated at 200X2 @ 4-ohms. It's lower quality than Soundstorm, which is a door stop.

-------------
Support the12volt.com

Print Page | Close Window