can mrp f240 power 10w1v2 , sps 57c2?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98046
Printed Date: May 14, 2024 at 7:23 PM

Topic: can mrp f240 power 10w1v2 , sps 57c2?

Posted By: rkulp18
Subject: can mrp f240 power 10w1v2 , sps 57c2?
Date Posted: October 17, 2007 at 12:50 AM

Will an Alpine MRP-F240 power:

Alpine SPS-57C2
JL Audio 10W1v2.4 (Bridged)

Amp is 100watts RMS and sub is 150watts. I chose this amp because I have very little space. Will this power my sub enough to give decent bass?

Replies:

Posted By: houndz805
Date Posted: October 17, 2007 at 1:00 AM

Should be fine. 10w1's are very efficient and I have never done a system that sounded bad with those woofers. More power would help though if you wanted to maximize the performance of that sub. I currently have a 13w1 in my system powered with a JL 1000/1. Sounds Incredible. In terms of SQ, a great sub.

-------------
It was already broken, but I made sure it could never be fixed again.

Print Page | Close Window