avic d3 aux in

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98061
Printed Date: May 14, 2025 at 2:33 PM

Topic: avic d3 aux in

Posted By: warpedimage3
Subject: avic d3 aux in
Date Posted: October 17, 2007 at 1:49 PM

How do you select the front aux in port on the Avic D3 as the source to listen to a stiletto plugged into it with an aux cable?

Replies:

Posted By: houndz805
Date Posted: October 18, 2007 at 1:06 AM

Aux 1 or aux 2? You could always download the manual.

-------------
It was already broken, but I made sure it could never be fixed again.

Posted By: warpedimage3
Date Posted: October 18, 2007 at 1:16 PM

I dont know whether it is aux1 or aux2 it is the one on the front. I looked through the manual and it says there is an aux on the front but i couldnt figure out how to switch to that source.

Posted By: suprfast
Date Posted: December 13, 2007 at 9:30 PM

you will probably have to turn it on in the options menu. I know sony's require you to do this, i wouldnt doubt if pioneer was the same. Usually you access this menu when the unit is turned off.
kris

Print Page | Close Window