battery terminal/distribution block
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98354
Printed Date: May 04, 2024 at 5:41 PM
Topic: battery terminal/distribution block
Posted By: ikethegoalie
Subject: battery terminal/distribution block
Date Posted: October 26, 2007 at 7:24 PM
Ok, I am replacing my battery terminals and I need to add a distribution block in order to get the appropriate size outputs for my vehicles fuse box.
My question is this, I found a distro block that would fill my needs perfectly, but it is a fused distro block. What size mini-anl fuse should I use for the wire to the vehicle fuse box?
Vehicle is a 2006 Colorado Crew Cab
Replies:
Posted By: godd dan it
Date Posted: October 27, 2007 at 1:01 AM
The size of the fuse depends on the gauge of the wire. So what gauge are you using?
-------------
Posted By: ikethegoalie
Date Posted: October 27, 2007 at 8:19 AM
well, the wire going into the fuse box is a 4 gauge wire, the battery terminal i got has 3 0 gauge outs, one to the alternator for the big three, one to the sound system, and third I was going to run to a DB and have the fuse box wires and remote start wires and any other accessories into it
|