amp with existing crossover

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98678
Printed Date: July 15, 2025 at 6:55 PM

Topic: amp with existing crossover

Posted By: nick.falocner
Subject: amp with existing crossover
Date Posted: November 05, 2007 at 9:40 PM

I'm looking to buy an amp to run my front and rear speakers. But I'm not sure about wiring up front becuase there is a crossover there already. Do I just run the amp speaker wires into the input or do I remove the crossover all together, if so how would I wire the woofer and tweeter to the amp

Crossover is: Sony Xplod Crossover Network XS-HL635

Thanks

Replies:

Posted By: jmelton86
Date Posted: November 05, 2007 at 10:17 PM

Wire the crossovers supplied with the Sony speakers to the amp, then wire the tweeters and woofers to the crossover.

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Print Page | Close Window