Print Page | Close Window

alpine ivaw 200

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99428
Printed Date: May 06, 2025 at 11:36 PM


Topic: alpine ivaw 200

Posted By: jvillefinest
Subject: alpine ivaw 200
Date Posted: November 28, 2007 at 7:54 AM

i have an alpine IVAW 200 running video to a Clarion VA700 video amplifier and then out to my screens. i built an amprack to hold all 5 amps and the 15in sharp screen. while wiring it all up i got the + and - power crossed on the VA700 and the RCA running from the H/U to the video amplifier started getting hot....shortly after i found the problem and corrected it. now for some reason i cant get video to come out of the IVAW200. i tried going through the VA700, then straight from the h/u with a known good RCA and still no video. one note is that the female RCA from the h/u to the RCA that ran to the Video amplifier never got hot and the h/u never turned on. is it possible i fried the video out on the ivaw200? No other features have been affected.



-------------
2007 Acura TSX
SQ setup in the works



Replies:

Posted By: DYohn
Date Posted: November 28, 2007 at 10:05 AM
Sounds like you fried something.  Time for repairs.

-------------
Support the12volt.com


Print Page | Close Window