Print Page | Close Window

Wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9962
Printed Date: September 15, 2025 at 1:27 PM


Topic: Wiring

Posted By: h0twh3els
Subject: Wiring
Date Posted: February 23, 2003 at 5:19 PM

I am using 3 capacitors, can i just use one input off my dist block and run the wire from 1 positive to the other on the cap, and do so the same with the ground? Im just trying to avoid buying extra stuff when i dont need to. thanks



Replies:

Posted By: wvsquirrel
Date Posted: February 24, 2003 at 10:36 PM
Yup. It's called a bus bar. You can use wire, but it can get kinda thick at the attatchment points. Most manufactures make bus bars to tie caps together with that "professional" look

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com



Posted By: h0twh3els
Date Posted: February 25, 2003 at 8:50 PM
Squirrel, thanks a lot. This stereo stuff is starting to gve me a head ache-



Posted By: wvsquirrel
Date Posted: February 25, 2003 at 9:29 PM
No prob. Glad to help.

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com


Print Page | Close Window