3 mtx 4500
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99714
Printed Date: May 03, 2024 at 3:51 AM
Topic: 3 mtx 4500
Posted By: nemesis08
Subject: 3 mtx 4500
Date Posted: December 06, 2007 at 9:21 AM
Hey all Just finish get a sub and box comb its 3 mtx 4500 that handels 250 per coil so it says it handel 675 rms total. So the back of the box says 4 ohm . now I want to get a amp that says 600 rms at 4 ohms. will this work or will my speakers show the amp 2 ohms thanks in advance.I JUST GET CONFUSED ABOUT OHM doodie
Replies:
Posted By: jl.w7
Date Posted: December 06, 2007 at 10:11 AM
I did not understand that post, try retyping it a little s-l-o-w-e-r , if all your looking for is an amp with that specs, try the MTX 600/1
-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier
Posted By: nemesis08
Date Posted: December 06, 2007 at 10:58 AM
okay here we go I have a comb sub and box. were you pulg in the spearker wires it says 4 ohm. now i want to use the power which total 675. I found a amp that says 600 RMS at 4 ohm. if i have a 4 ohm total subs ( All 3 subs ) and I hook it up to the amp that is stable at 4 ohm and produces 600 RMS at 4 ohms. Will that set-up work. or by hooking this up while the amp really e at 2 ohm. You get what i'm trying to say ?
Posted By: jl.w7
Date Posted: December 06, 2007 at 12:24 PM
did you build the box? if it says 4 ohms on the box then yes it should be alright.If you did build the box and put the subs in yourself, how did you wire them? ------------- MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier
Posted By: nemesis08
Date Posted: December 06, 2007 at 12:45 PM
The box was made for the subs they are wiredup in series. its actually from crutchfield thats why I just want to use it the almost the fullest.... Thanks so much for your input....!
Posted By: nemesis08
Date Posted: December 06, 2007 at 12:47 PM
crap I mean use it to the fullest. I have to type fast i'm at work.
Posted By: dwarren
Date Posted: December 06, 2007 at 1:12 PM
Look, if you haven't rewired any thing, and it states 4 ohms on the box, then get an amp that produces roughly your RMS power (600-700 watts) @ 4 ohms.
-------------
Posted By: nemesis08
Date Posted: December 06, 2007 at 2:59 PM
Thank you dwarren thats what i wanted, also thanks jl.w7
Posted By: jmelton86
Date Posted: December 06, 2007 at 6:28 PM
Your best (less expensive) option would be to get a 2channel amp that puts out about 600watts RMS x 1 (bridged) @4ohms. If you were to get a mono (1channel) amp, you'd be paying more for it cause it can put out more power @ 2ohms, etc...
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
|