LMB Audio Citroen C2 Demo Car 16 AA 10s,
Printed From: the12volt.comForum Name: Rides and Systems Gallery
Forum Discription: Show off your vehicles, systems, and installations.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132296
Printed Date: May 01, 2024 at 4:40 PM
Topic: LMB Audio Citroen C2 Demo Car 16 AA 10s,
Posted By: liam_b
Subject: LMB Audio Citroen C2 Demo Car 16 AA 10s,
Date Posted: October 02, 2012 at 4:55 AM
Well heres car im working on at the moment its a citroen C2 will be a daily drive system
Headunit: not decided yet
Front end: 8x b2 audio hn8" mids, 4x hntt bullet Tweeters
Subs: 16x Ascendant Audio Arsenal 10s
amps: 4x SPL Dynamics ICE-1500D, 2x SPL Dynamics ICE-150.4
Batteries: 2x XS Power D3100, 1x XS Power 2400
6x sheets of 18mm birch
epicenter
ipad fiblerglassed into dash
4x xs power 0gauge runs
1x 300amp alternator
2 m16 threaded bars and a fiberglass resin mix inside door frame
read windows welded up and smoothed
3x Silent Coat MultiLayer Extra Bulk Packs 1
door speakers
Replies:
Posted By: dasbogie
Date Posted: October 14, 2012 at 5:57 PM
Posted By: liam_b
Date Posted: November 11, 2012 at 4:23 PM
thanks dude
hopfully one more skim and that side is done
rear panels made and worked out the amp layout can now fit a 7th and 3rd 3100d if we need to
time to start getting the box sealed
time to start fiberglassing now going todo the corners where the car is 1st then im going todo the whole inside of the box
steel bracing on all 8 corners
car is in primer at last
smoothed off the fog lights
3liters of fiberglass and resin mix in the whole top half of door
bus bar finally done might give it a polish when i have time just need need to make perspex box for it now
now this is the reason you dont leave the keys in the car i leave the car is reverse as it has no hand brake.
duncan decided to start the car it shoot back 10ft into 10 of the subs and a wall :\
damage to the car
damage to 1 sub
funny how the subs aint even in the car yet and there destroying it :L
well cuple more bits been going on car is now ready for paint and the main box is nearly done just a little more steel todo
then cuple coats of fiberglass once thats done i can get the tunnel finished and get it in the car for good and get it fully
sealed up and start running wiring
think we are going to go for the brushed look as not a fan of the bling bling polished look
not sure what the plan for the roof is might wrap it in matt black
hopefully tuesday or wednesday it will be in paint then i can start putting it back together and wont feel like i have so much todo
Posted By: placid warrior
Date Posted: August 14, 2014 at 2:56 PM