Old Setup And The New one

Printed From: the12volt.com
Forum Name: Rides and Systems Gallery
Forum Discription: Show off your vehicles, systems, and installations.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72636
Printed Date: May 01, 2025 at 4:52 PM

Topic: Old Setup And The New one

Posted By: cubinbob
Subject: Old Setup And The New one
Date Posted: February 11, 2006 at 5:58 PM

On the old setup i used to run 3 mofo 15's. 3 1800 D class power acoustik amps for the subs one four channel and one 2 channel for the mids and highs. Two pairs of component sets and two pairs of 4x6 All of that was pushed by 5 optima yellow tops. Custom build fiberglass consol that hold 2 6.5 and 2 tweeters along with the head unit. I relocate the head unit so i can run a dvd touch screen up front. After the consol was done I decided to build an enclosure to hold 2 pairs of 4x6 so I can have rear fill sound. Custom built tweeter pods for the doors components. All of this was inside a four door dodge neon. Pictures of new setup coming soon. Sorry that I did not take any pictures during the fiberglass. Picture bellow.
posted_image

Replies:

Posted By: kirktcashalini
Date Posted: February 12, 2006 at 3:53 PM

DAMN, is the new system as Big as that one. That thing must make you forget what you are thinking about.

-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

Posted By: sir_misery
Date Posted: February 12, 2006 at 9:04 PM

please tell me its for compitition only , not an every day driver right? can you hear me now? looks good tho

-------------
yeh? i can do that?

see! told ya!

Posted By: cubinbob
Date Posted: February 12, 2006 at 9:55 PM

Already. Yep that was a daily driver. The only reason why I changed the setup was because of the weight and I did not want to upgrade to airbags or air struts. Was bumping hard. The new setup consists of only 2 1800 D class power acoustik amps links into one that pushes out around 3000 rms 2ohm to 4ohm. All that power is being used by 3 10 inch Power Acoustik fx series subs (800rms dual 4 ohm each) in a ported box that 2.6 cubic feet. Big change from 10.2 cubic feet from the last setup. I still ended up using four batteries in the back. For mids amp I only kept the four-channel amp to run the components in the consol and the doors. Had to get rid of the 4x6 consol because now a finally have a back seat. Let me tell for that small of a box and the subs being 10s I am very very impressed. I can not figure out how to post the new pictures. Please help so i can post them

Posted By: cubinbob
Date Posted: February 12, 2006 at 11:18 PM

Posted By: cubinbob
Date Posted: February 15, 2006 at 7:42 PM

it is not shared. one chamber two ports one sub