how to turn one lead into four leads?
Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104291
Printed Date: May 13, 2024 at 2:35 AM
Topic: how to turn one lead into four leads?
Posted By: tipsymcstagger
Subject: how to turn one lead into four leads?
Date Posted: April 26, 2008 at 4:56 PM
I don't do this for a living so I thought I'd get some opinions from those of you who do.
I'm adding a few electrical accessories to my motorcycle. For arguments sake, lets say I'm adding four accessories and each will have it's own relay. I want each relay to be triggered by the same switched source and I want each of the trigger leads (the wires coming from each relays "85" post) to share one side of a four pin Delphi connector.
What is the best way for me to spread the single trigger lead among the four pins in the opposite side of the Delphi connector? In other words, how do I turn on lead into four leads?
Obviously, I can think of ways to do it, but I'm wondering what is the best/proper way.
Thanks.
Tipsy
Replies:
Posted By: tipsymcstagger
Date Posted: April 26, 2008 at 11:56 PM
how do I turn on lead into four leads?
Excuse me, I meant to write "how do I turn one lead into four leads?
Tipsy
|