Print Page | Close Window

bi xenon h/l relay controller

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106029
Printed Date: May 07, 2025 at 10:28 PM


Topic: bi xenon h/l relay controller

Posted By: glaucoqs
Subject: bi xenon h/l relay controller
Date Posted: July 09, 2008 at 10:18 PM

hello..i need a diagram of a relay for my HID motorcycle.. its broke..the operation is simple.
it works with a 12v pulse (positive and pulse negative reversed polarity). and not with constant energy as some others work... when i turn the low bean, its send a pulse to solenoid e stop the power.. when a turn the high bem, its send a reversed polarity power to solenoid and stop...inside the controller has a LM555 in circuit, but the rest is broke.. please help-me.. thanks



Replies:

Posted By: hotwaterwizard
Date Posted: July 13, 2008 at 6:45 PM

Here is what I found

https://faqlight.carpassion.info/headlamp-harness.html

https://www.freepatentsonline.com/6642673.html



-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !



Posted By: i am an idiot
Date Posted: July 14, 2008 at 5:19 AM
I do not know how much room you can give up on your motorcycle. I can duplicate this for you but you will have to use 4 relays and a few other simple components. If this is acceptable let me know and I can post instructions today.


Print Page | Close Window