going from 3 wires running/turn to 2 wires

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111372
Printed Date: May 10, 2024 at 7:37 AM

Topic: going from 3 wires running/turn to 2 wires

Posted By: kap142
Subject: going from 3 wires running/turn to 2 wires
Date Posted: February 07, 2009 at 10:22 AM

On a 79 Honda CB750K I want to do away with the running light turn signal combo and simply wire in 2 wire turn lamps both front and rear. The wiring diagram I have indicates both lights (either front or rear) go to a common ground then one wire should (I think) be pulse and one constant. This is just one of the electical issues I have but the info will help greatly.