clifford gp1000t on r1

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118490
Printed Date: May 03, 2025 at 1:32 AM

Topic: clifford gp1000t on r1

Posted By: alexg342
Subject: clifford gp1000t on r1
Date Posted: December 13, 2009 at 4:36 PM

Hi.
Would anyone be able to point me in the right direction to sort out my alarm on my 07 r1. I have just installed a Clifford gp1000t which seem to be working fine at first but now won't stop going off. It always says that it is down to the tilt sensor so I have turned the sensitivity right down but this has made no difference. It has got to the point now where when you arm it it will go off within 10-20 sec!!! Help! Any info would be gr8!
Thanks
Alex.G

Replies:

Posted By: i am an idiot
Date Posted: December 23, 2009 at 5:34 PM

Is the tilt sensor inside the brain of the unit? If so, have you tried adjusting the mounting angle of the brain?

Print Page | Close Window