clifford gp1000t bike alarm

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121408
Printed Date: May 03, 2025 at 1:11 AM

Topic: clifford gp1000t bike alarm

Posted By: shadynet
Subject: clifford gp1000t bike alarm
Date Posted: April 18, 2010 at 1:16 PM

Can you please help me i am trying to fit a gp1000t alarm to my yzf600r bike

and i can not get it to work fully in the install pdf the yellow wire says

Yellow ignition input (+)12 V

Connect this wire to any ignition wire on the motorcycle that remains positive while

the starter button is pressed. It will report on zone 6 if triggered when armed. when i do this the alarm activates when i turn the key to on

When alarm is off

Replies:

Posted By: catback
Date Posted: May 30, 2010 at 1:54 PM

The alarm will not trigger when it is disarmed. You need to make sure it's disarmed before you turn the bike on.

Posted By: topinstaller200
Date Posted: June 02, 2010 at 11:52 PM

usually Clifford is 2 chirps-armed 1 chirp -disarm

Print Page | Close Window