2001 suzuki bandit
Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126177
Printed Date: April 24, 2024 at 11:23 PM
Topic: 2001 suzuki bandit
Posted By: chev104275
Subject: 2001 suzuki bandit
Date Posted: February 16, 2011 at 9:57 AM
I changed all the turn signals to led 1157 bulbs and making the turn signal lights act as running lights. The front works fine as they were wired like that already. But the back if i connect the wire coming from the rear tail light assy for the running lights the directional will stop working and the directional indicator will be lit dim. if i connect just the running light it works or if i connect just the directional it works just not together.
Any ideas on how to fix this ?? thanks Joe
-------------
If i Can't Install it I Don't need it Joe
Replies:
Posted By: i am an idiot
Date Posted: February 18, 2011 at 9:09 PM
Connect the taillight to the dimmer of the 2 elements. Connect the blinker wire to the brighter of the 2 elements.
Posted By: chev104275
Date Posted: February 19, 2011 at 5:53 AM
Ha ha ha I know that. I think I figured it out. I'm waiting for a new flasher relay to correct the fast flash. If I put a diode in the turn signal wire it stops the feedback from the parking light but without the new relay it stops flashing I'm assuming because on the lack of load on the factory flasher relay
-------------
If i Can't Install it I Don't need it Joe
Posted By: chev104275
Date Posted: February 23, 2011 at 5:17 PM
Allset with the new flasher relay installed it flashes correctly and with a diode inline with the turn signal wire no back feeding from the parking lights
I used a ELFR-1 from customled.com. 2 min install
-------------
If i Can't Install it I Don't need it Joe
|