Using An Aftermarket CDI Unit, Suzuki GSX750
Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148047
Printed Date: May 03, 2025 at 1:01 AM
Topic: Using An Aftermarket CDI Unit, Suzuki GSX750
Posted By: danielhowden
Subject: Using An Aftermarket CDI Unit, Suzuki GSX750
Date Posted: May 31, 2024 at 1:47 PM
Hi, I have a Suzuki GSX750 that has a failed CDI unit. I was looking at using an aftermarket CDI unit but I haven't had any luck getting one to work thus far.
So, this is a 4 cylinder bike with two ignition coils. It has a sensor down at the crank for an ignition timing signal, I have measured this and it works giving out a small AC voltage of up to 1v.
I am happy to work with electronics and I wire up bikes as part of my work but I just feel I am missing something here and I wonder if someone could possibly point me in the correct direction.
As far as I can see the main stay of the basic CDI units have one pick up connection, I need a double pick up connection so that it can send it's 1v AC to the unit.
Any help here is very much appreciated.
Thanks, Daniel.
|