Print Page | Close Window

Ungo MC2000-II Manual?

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2497
Printed Date: May 16, 2024 at 11:32 PM


Topic: Ungo MC2000-II Manual?

Posted By: HammerACE
Subject: Ungo MC2000-II Manual?
Date Posted: August 04, 2002 at 4:41 PM

I got an UNGO MC2000 from the local motorcycle shop, but they didn't know how to install it and didn't have the instructions. Needless to say I ghot it cheap. The nearest Clarion shop that might be able to help is 100 miles away. Can anyone tell me where the UNGO wiring schematic can be found? Its not on the Clarion site - all they have there is the owners manual on button programming.



Replies:

Posted By: Vas_Sam
Date Posted: August 23, 2002 at 9:47 AM

I have some and I'll send it to your hotmail. I'm looking for Installation manual of MS2004, if somebody know something give me a shout at vas_sam@hotmail.com , please.




Posted By: cpgoose
Date Posted: August 23, 2002 at 11:05 AM

In response to your email, I was unable to find the 2004 install manual in the past.  You may want to check these two posts

This one is about the owner's manual:  https://www.the12volt.com/installbay/display_topic_threads.asp?ForumID=3&TopicID=1889&SearchPagePosition=1&search=ungo&searchMode=allwords&searchIn=Thread&forum=0&searchSort=dateDESC&ReturnPage=Search

This one has some guy that may have it for the next model up....the wires may be similar:  https://www.the12volt.com/installbay/display_topic_threads.asp?ForumID=5&TopicID=2411&SearchPagePosition=1&search=ungo&searchMode=allwords&searchIn=Thread&forum=0&searchSort=dateDESC&ReturnPage=Search




Posted By: cpgoose
Date Posted: August 23, 2002 at 11:15 AM

Ok, more info:

I went to Clarion's Website, went to the Contact section, and then it said to go to Pacific Coast Parts' (PCP) website for parts and manuals.

I went to PCP's website, and called them (toll-free:), and they said they don't have that manual.  You have to go to an authorized dealer.

I think you should get the install manual for a lower model because other posts have said they're probably similar.

(and I don't even need this manual! posted_image )


Print Page | Close Window