Print Page | Close Window

start kill for ground starter

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75134
Printed Date: May 21, 2024 at 4:45 AM


Topic: start kill for ground starter

Posted By: dxdenis02
Subject: start kill for ground starter
Date Posted: March 26, 2006 at 3:29 PM

im installing a clifford gp500 with a built in start kill that requires +12  im assuming to trip the interal relay but the motorcycle has a ground pluse that trips the oem starter relay   i know i can catch the output of the oem relay which is +12 and break that line  but that wire is 8awg and the oem relay is 15amp fused   so how can i interrupt the neg that trips the factory relay and if i cant come up with some ingenious relay trick will the internal clifford be able to had the current flow



Replies:

Posted By: xscash
Date Posted: March 26, 2006 at 4:22 PM

cut the neg starter wire conect it to 30 and 87a......86 to ign 85 to alarm

XS



-------------
expandable sound
south of boston


Print Page | Close Window