has anyone done a remote start on a motorcycle? i am gonna do an alarm on my friends bike and was thinking of doing a remote start, he has a nutrul safty switch so i reall dont see and reason why i cant but was just looking for some input.
well i know if i dont do it he will get some one else to and i know i will do it right and dont trust any one else to do it for him. my best friend here. but i was going to do shock sensors and any time one gets triped cut the starter so if it moves it should shut off and i do mercury switchs so that if it is tiped the same thing. and i am trying to think of at lest one more saftey to use. and il prolly use a viper 791xv or the 771 i think?
i think there is a seperate RS system for motorcycle. do some research. cant use regular car alarm remote starter for bike, but nice try
why not it should work.
Ok, i had a big a55 streetbike before (kawasaki zrx 1200 r) and i would never consider putting a remote start on it.. u will wreck the 5hit out of it.
think about it, 4 pistons going 600-1200 rpm, no cooling effect because the bike aint movin and no air = overheating = motor damage
use common sense guys cmon
-------------
DKH
dakkh] wrote:
Ok, i had a big a55 streetbike before (kawasaki zrx 1200 r) and i would never consider putting a remote start on it.. u will wreck the 5hit out of it.
think about it, 4 pistons going 600-1200 rpm, no cooling effect because the bike aint movin and no air = overheating = motor damage
use common sense guys cmon
but you do have to let a bike warm up and as fr asi know it has a cooling fan. do you always start your bike and start riding emidetly? no so as long as it is not going to long it should be fine. i could set it to run for 10 minutes? mabey less. and why will it wreck it has a nutrul safty swich and i would use that and also i was gonna use a merc switch so it will go of if tiped and was also going to make that cut the remote start. just trying to think of one more saftey
well what i finaly came up with is i am going to do the merc switch and shock sensor, bothe for alarm triggers and to cut the remote start. also for the door pin(manly for programing puproses) i will go to the clutch handle. now i am not sure if it has a swith of some sort or if i will have to make one of my own. i am trying to talk my friend in to a dule zone sensor but he is a lil cheap so not sure if i can. also i am going to hock up his leds he has as the parking break flash. my last idea is a closed loop sensor, i have not used one yet, so has any one hear? are they good or to much hassle. figured he could put it through the rim so if it moves forward or back it will go off.