Print Page | Close Window

brake and turn on leds

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91992
Printed Date: May 07, 2025 at 8:27 AM


Topic: brake and turn on leds

Posted By: harley cruiser
Subject: brake and turn on leds
Date Posted: March 22, 2007 at 11:03 AM

Hey great site, I want to wire up my Leds on my bike so that they are both turn signal and brake. I have two rows on both sides of my rear fender with twenty lights on each side, I also have a center brake running light with leds. I know that I need to have two realays on each side but do not know how to wire them. I know relay basics but am stumped. The Leds I have under control, I already have them and the resistors figured out. Yes I know they make a module for this but the kit is fifty bucks and I now that I can do it cheaper with relays and be more reliable.
thanks Steve



-------------
Harley Cruiser



Replies:

Posted By: harley cruiser
Date Posted: March 22, 2007 at 4:39 PM

I think I found it in a old post.

https://www.the12volt.com/installbay/forum_posts.asp?tid=83462&PN=1&tpn=1

Need to study it and see if it is what I need. Thanks Steve



-------------
Harley Cruiser


Print Page | Close Window