kawasaki ninja 07

Printed From: the12volt.com
Forum Name: Motorcycle Electronics
Forum Discription: Installing Stereos, Alarms, Remote Starters, Lights, Garage Door Openers and other electronics on motorcycles.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94212
Printed Date: May 04, 2025 at 12:47 AM

Topic: kawasaki ninja 07

Posted By: pitoaudiovisual
Subject: kawasaki ninja 07
Date Posted: May 24, 2007 at 1:18 PM

Does any know how difficult it is to put an alarm on a motorcycle.. What is the goin rate to install one and also if anyone has paperwork or tips all is appreciated..thanks....

-------------
Confidence is the key to any project!!

Replies:

Posted By: lsondubz
Date Posted: May 24, 2007 at 2:15 PM

They are pretty easy provided there is enough room for the module, Basic 12V and Ground to battery, youll have to test the wires for the turn signals, Merc Switch/Tilt Sensor, and an Ignition lead right off of the cylinder, Ive done a few lately and they really arent that bad, I just tell customers about 2-3 hours labor for basic system and the Merlin Motorcycle Alarm from DEI...

Posted By: pitoaudiovisual
Date Posted: May 25, 2007 at 5:28 PM

thanks i will see if i can do it.

-------------
Confidence is the key to any project!!

Posted By: 1fkn1998accord
Date Posted: May 30, 2007 at 5:57 PM

just like lsondubz said...just test the leads and place the alarm modual in a safe area...ive put a codealarm remote start in 2 bikes already and it worked well..even when the bikes start up by them selves...the bikes i did was a 2002 gsxr 600 and a 07 850 bulivard both are from suzuki

Posted By: pitoaudiovisual
Date Posted: June 10, 2007 at 9:16 AM

i normally charge about 125 to 150 for cars but just wondering if the price is about the same for a motorcycle.

-------------
Confidence is the key to any project!!

Print Page | Close Window