Print Page | Close Window

Compustar Brain Update, Benefits Ford/Mazda - FYI

Printed From: the12volt.com
Forum Name: Car Security and Convenience - Hot Topics
Forum Discription: Stickied topics from our Car Security and Convenience forum. Car Security and Convenience FAQs. Read First!
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130479
Printed Date: April 19, 2024 at 4:56 AM


Topic: Compustar Brain Update, Benefits Ford/Mazda - FYI

Posted By: tedmond
Subject: Compustar Brain Update, Benefits Ford/Mazda - FYI
Date Posted: February 02, 2012 at 12:10 PM

When updating the compustar brain to:

CM5/6X00 With V6.7 VD6

when connecting to the BLADE through web-link 5, under options setting 1-12 you can change the door trigger to NC or NO. This is beneficial for those that install on older ford/mazda often. luckily late models we have the blade-al to take care of triggers for us. No need for resistors/diodes. leave the jumper on negative and diode isolate all 4 triggers.

not sure if a few of you were aware, but I just noticed this today. Usually i use my op500 to change settings after the install.


-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert


Print Page | Close Window