Print Page | Close Window

Mannix SM700 Remote Starter Tach Learning - FYI

Printed From: the12volt.com
Forum Name: Car Security and Convenience - Hot Topics
Forum Discription: Stickied topics from our Car Security and Convenience forum. Car Security and Convenience FAQs. Read First!
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90314
Printed Date: May 01, 2025 at 12:49 PM


Topic: Mannix SM700 Remote Starter Tach Learning - FYI

Posted By: a1tech
Subject: Mannix SM700 Remote Starter Tach Learning - FYI
Date Posted: February 10, 2007 at 3:54 PM

Most installer have problem with tach learning and remote start problem. Well, here is the Free Technical for you. 1. For Automatic transmission, You have to remove the jumper from the module.

2. You have to Ground the Neutral Input wire otherwise it does not  remote start.

3. You have to set the Z to the off position on Your LCD transmiter.

4. You must have the right Tach Wire Otherwise it dose not work at all.

5. Making sure the jumper is on the Tach side if you set up for tach system.

6. If you change to generator system, you have to power off the module for 20 second and change the jumper to generator side.



-------------
Good at repair car and remote car starter


Print Page | Close Window