Print Page | Close Window

marine audio

Printed From: the12volt.com
Forum Name: Marine Electronics
Forum Discription: Boat Stereos, Security, Navigation, Lights, Switches, Gauges, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113442
Printed Date: May 02, 2025 at 12:14 PM


Topic: marine audio

Posted By: marine2
Subject: marine audio
Date Posted: April 27, 2009 at 9:36 AM

I have a Kenwood componet system in a boat that operates on 110v ac.  I would like to install a 12v sony stero.  I plan to wire the sony into the 12v system on the boat but would like to run the audio out of the sony and through the Kenwood system amp and equalizer for distribution to all the speakers on the boat.  The sony has an audio output to an amp.  Can I plug the sony output directly into the Kenwood amp without any problems?  Thanks for your help.

-------------
TonyB



Replies:

Posted By: ckeeler
Date Posted: April 27, 2009 at 12:29 PM
you wont have any problems at all doing that.


Print Page | Close Window