relay for boat audio system
Printed From: the12volt.com
Forum Name: Marine Electronics
Forum Discription: Boat Stereos, Security, Navigation, Lights, Switches, Gauges, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120049
Printed Date: April 24, 2024 at 10:31 PM
Topic: relay for boat audio system
Posted By: jaxfoiler
Subject: relay for boat audio system
Date Posted: February 11, 2010 at 8:35 AM
First time poster, hope I am posting in the correct section.
I have a high powered system in my boat. I just installed a new tower speaker amp (wet sounds syn4). After installing I am have a noise bleeding effect. The speakers pop when I use other sources, ie: other switches. I was told to wire all audio equip to 1 battery to isolate it but that I also might need to use a relay. What exactly does a relay do and where would I wire it in? I am new to installing relays
Thanks
Replies:
Posted By: howie ll
Date Posted: February 11, 2010 at 10:18 AM
They are talking about a second deep cycle battery and a split charging relay, e.g. Stinger
Posted By: jaxfoiler
Date Posted: February 11, 2010 at 10:40 AM
I already have 2nd battery and smart charging system..They said I would need a relay to do something. Something about letting more current/power flow to the radio and eq. Thats where i am lost
thanks
Posted By: howie ll
Date Posted: February 11, 2010 at 5:17 PM
Ask them what they mean!
|