Print Page | Close Window

Kenwood KMR322BT Install

Printed From:
Forum Name: Marine Electronics
Forum Discription: Boat Stereos, Security, Navigation, Lights, Switches, Gauges, etc.
Printed Date: August 05, 2021 at 10:07 PM

Topic: Kenwood KMR322BT Install

Posted By: jt1313
Subject: Kenwood KMR322BT Install
Date Posted: July 16, 2019 at 2:40 PM

Hello everyone! I have a marine stereo configuration question. I've installed a Kenwood KMR322Bt head unit to a JL M700 Amp that is running a JL subwoofer, and a set of JL7.5 and JL 6.5's aft (outside) these speakers were wired through the amp and they sound problem or question is the front (cabin) speakers I wired directly through the head unit giving me no control over volume, fade balance etc......I'm guessing I wired it wrong....any suggestions?

threeqz is online now Report Post      



Posted By: i am an idiot
Date Posted: July 17, 2019 at 7:37 PM
Do the cabin speakers play at all? Which wires of the radio did you connect them to?

Print Page | Close Window