Print Page | Close Window

AvicZ110bt, 2010 Ford F-250 - FYI

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation - Hot Topics
Forum Discription: Stickied topics from our Mobile Video and Navigation Forum.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122194
Printed Date: August 05, 2021 at 10:03 PM


Topic: AvicZ110bt, 2010 Ford F-250 - FYI

Posted By: spldoc72
Subject: AvicZ110bt, 2010 Ford F-250 - FYI
Date Posted: June 07, 2010 at 12:42 PM

We recently integrated the factory rearview camera that comes as an option on the 2010 Ford F250 trucks with a Pioneer AvicZ110bt. The camera is installed next to the handle in the tailgate. The wiring for the camera can be accessed in 3 places. Behind the rearview mirror at the plug, in the passneger "A" pillar harness (pictured), or in the passenger side kick panel in the large molex plug in front of the fuse block. The + video signal wire is white with green stripe and the - video signal wire is brown with black stripe. If you leave the video feed tied to the monitor in the mirror when you tie it in with the new source, you'll experience a degraded image as the camera does not have enough signal strength for 2 monitors (will need an additional video amp to boost signal if you want it to feed both monitors).
posted_image

-------------
Burke McKay
District Manager/12 Volt Buyer
Hooper's Stereo Video & Computer
(601) 693-2715






Print Page | Close Window