2008 nissan pathfinder, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100026
Printed Date: May 14, 2025 at 5:06 PM

Topic: 2008 nissan pathfinder, alarm/remote start

Posted By: xdrtypopx
Subject: 2008 nissan pathfinder, alarm/remote start
Date Posted: December 14, 2007 at 8:38 PM

Looking for wiring information for a 2008 NIssan Pathfinder to setup a remote start / alarm. Locations would be ideal and any help would be GREATLY appreciated!!! Thanks guys!

Replies:

Posted By: wiretapper
Date Posted: December 14, 2007 at 10:01 PM

FWIW, the wiring is identical to the '07, except for the lock-arm, and unlock-disarm wires.

I already replied to your PM on this.

Posted By: xdrtypopx
Date Posted: January 02, 2008 at 12:09 PM

everything is all set. Only problem is when I lock the doors / arm the factory alarm the horn does not honk with the Viper Remote. Model is the 160XLV. What would i need to do for the audible confirmation?

Posted By: StealthEs
Date Posted: January 02, 2008 at 1:57 PM

Hook up the horn honk wire. The brown wire at the main harness.

-------------
Cris

Print Page | Close Window