Print Page | Close Window

adding more alarms

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100086
Printed Date: May 23, 2024 at 10:32 AM


Topic: adding more alarms

Posted By: natethegreat11
Subject: adding more alarms
Date Posted: December 16, 2007 at 11:03 AM

I've got more than one alarm attached to my Clifford Matrix 10.5 System.

It seems that my sirens don't operate at full capacity because they are all wired to the same Brown Wire (Alarm Output) coming out of my brain unit.

How do I wire more alarms to my system and keep them all fully powered?



Replies:

Posted By: mikvot
Date Posted: December 16, 2007 at 11:16 AM
With a relay. if the alarms siren output is (+) which i'm sure it is, then this is how. 86   brown wire from alarm. 87 12v, 85 ground, 30 out to sirens.

-------------


Print Page | Close Window