2005 dodge ram abs, airbag light
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100098
Printed Date: April 19, 2024 at 7:08 AM
Topic: 2005 dodge ram abs, airbag light
Posted By: wwizard
Subject: 2005 dodge ram abs, airbag light
Date Posted: December 16, 2007 at 5:11 PM
installed an autostart last year and customer has called and said that the abs light and airbag light randomly turn on very quick and buzzer chimes then just as quickly goes out...i have unplugged bypass which is xk531 I believe and still does it I changed the autostart itself with new module... could the lights and unit not be related?or did I do somethign wrong?
Replies:
Posted By: wwizard
Date Posted: December 16, 2007 at 5:15 PM
my bad ment 2005
Posted By: saskpuller
Date Posted: December 17, 2007 at 7:47 AM
I have had dodge trucks do funky things before. Did you isolate the mux wire with a relay? That seemed to clear up the cruise and temp ind. issues I had. Not so sure about the air bag thing. Maybe when the wiring harness was taped up, it's putting undue strain on those wires. Doubt it, but maybe.
Posted By: wwizard
Date Posted: December 17, 2007 at 7:52 AM
I am going to scan it when it comes in apperently theres lots of issues like abs speed senors that go wrong and thats what causes these issues ill keep you posted i believe the remote has nothing to do with it but wanna make sure before sending him to dealership
Posted By: KarTuneMan
Date Posted: December 17, 2007 at 9:43 AM
This truck has 3 ign. wires that are the same color, but one is smaller. You need to use the smaller one, or this will trigger the ABS light. Check the connections at the ign. harness. The second ign. should be triggered with ground while running (so it comes on BEFORE the first ign. This "can" cause your airbag light) This wire is next to the red power wire in the corner of the plug. -------------
Posted By: Nate_Dogg
Date Posted: December 17, 2007 at 9:46 PM
Also,if run an LED security lamp near the cluster,it'll induce a curent,causing cluster probs.Your bypass could be causing back feed to the cluster as well.
-------------
Chrysler Tech.
Clarion dealer
Black Widow,Ungo alarms.
General electrical
Posted By: mobile1
Date Posted: December 18, 2007 at 8:16 PM
Nate_Dogg wrote:
Also,if run an LED security lamp near the cluster,it'll induce a curent,causing cluster probs.Your bypass could be causing back feed to the cluster as well.
LED mounted near the cluster causing feedback tripping an ABS light? How so? I've never heard this one before. The light has to be activated by the BCM/ECM it won't just turn on because an LED is mounted near it.
|