pro 2wsh as temperature/voltage display?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100164
Printed Date: May 09, 2025 at 11:25 PM

Topic: pro 2wsh as temperature/voltage display?

Posted By: bn880
Subject: pro 2wsh as temperature/voltage display?
Date Posted: December 18, 2007 at 8:39 AM

Anyone know if the CompuStar PRO-2WSH-AS has a temperature or voltage display on it's 2way remote? I know it has cold/hot start as that's in the CM4000 brain.

Referring to: https://..ca/dll?ViewItem&rd=1&item=260193531965

Replies:

Posted By: bn880
Date Posted: December 18, 2007 at 8:56 AM

I mean PRO 2WSH-AS

Does it have voltage or temperature display on the remote?

Posted By: dswift
Date Posted: December 18, 2007 at 12:40 PM

you in canada? If so yes. if not there is no P2wsh-s in the US compustar line.

-------------
"dont ground out!"

Posted By: bn880
Date Posted: December 18, 2007 at 1:48 PM

Yes I am in Canada and i am looking at the Canadian version of the unit. Then it is pretty certain it displays the temperature?

Here is another go at the link:

https://..ca/dll?ViewItem&item=260193531965

Posted By: tedmond
Date Posted: December 18, 2007 at 2:34 PM

ebay links dont work in the 12volt forum FYI.

Posted By: bn880
Date Posted: December 18, 2007 at 4:30 PM

Yes that has become pretty apparent by now. :D This forum is trying to murder me.

As for the original topic; I'm going to stick with YES for Canada.

Posted By: bn880
Date Posted: December 21, 2007 at 1:36 PM

I have been bench testing the Pro2WSH-AS and IT DOES INDEED show the temperature. (but not car battery voltage, as expected, that's a feature of the WSS)

However this is a tough one; how to switch from (F) to (C) temperature display on the 2WSHR LCD. I looked inside and only found a set of 4 resistor jumpers which I'm not going t even attempt to touch. (maybe it's the CM4000 brain that needs a setting?)

Posted By: bn880
Date Posted: January 20, 2008 at 5:13 PM

Just found out that the Pro2WSH-AS shows BOTH Temperature AND Car battery voltage on the 2 way. One has to tap the status button twice for the voltage, it appears in a hack format 12_4 etc. instead of 12.4V :)

Good.