compustar outputs not going to ground

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100199
Printed Date: May 09, 2025 at 11:20 PM

Topic: compustar outputs not going to ground

Posted By: jamball
Subject: compustar outputs not going to ground
Date Posted: December 18, 2007 at 8:45 PM

I have a Compustar Remote starter/alarm and the (-) outputs for Lights, ignition, starter, accessary will not go to ground when the starter is activated. The status output does work and it is from the same plug as the others. Does anyone know what might be causing the rest of the outputs not to go to ground?

Replies:

Posted By: evileagletalon
Date Posted: December 18, 2007 at 10:53 PM

bad harness, defective unit, burned outputs, it can be many things. The best thing you should do is return it to the Authorized Dealer that you bought it from.

Posted By: peterubers
Date Posted: December 18, 2007 at 10:54 PM

i'm assuming you've metered these outputs and that the harness seems intact --

all this being said, sounds like a bad brain -- blown transistors

-------------
The search function is your friend.

Print Page | Close Window