cliffnet wizard not working
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100200
Printed Date: May 05, 2024 at 1:38 AM
Topic: cliffnet wizard not working
Posted By: domiyork8090
Subject: cliffnet wizard not working
Date Posted: December 18, 2007 at 8:46 PM
Please help, I used cliffnet for a while now just fine, now is acting with the following message: Program Error wizard.exe has generated errors and will close. Please restart. Is funny i can read the alarm fine and test but when i try to save and exit that happens. Bought a new kit wire and software, same thing. Running Windows 2000 computer has built in serial port. wizard version 2.2. thanks, jorge.
Replies:
Posted By: showngo2000
Date Posted: December 18, 2007 at 8:57 PM
Are you sure that you are connected to the alarm and not just seeing the program? Try going to the Monitor tab and arm/diarm and see if you can see things change. If not, you might check your comm port settings. Let me know if this doesn't work.
Posted By: domiyork8090
Date Posted: December 18, 2007 at 9:02 PM
I am connected i can do my lights, lock, unlock everything but when trying to save setting or apply changes that is when i get the eror codes. Just finished reinstalling windows samething.
Posted By: showngo2000
Date Posted: December 18, 2007 at 9:39 PM
So you've connected and programmed before from this computer, cable, and alarm brain?
Posted By: domiyork8091
Date Posted: December 19, 2007 at 3:41 PM
Got it. conneted it to another computer and it works fine. Dont know what happened to my laptop. thanks for your help.
Posted By: howie ll
Date Posted: December 19, 2007 at 5:36 PM
General experience, the programme is glitched to hell, next model, even Clifford will run Bitwriter. I prefer manually doing everything but siren sounds, valet code, remote and crank time manually.
Posted By: ripper2008
Date Posted: February 11, 2008 at 1:31 PM
howie ll wrote:
General experience, the programme is glitched to hell, next model, even Clifford will run Bitwriter. I prefer manually doing everything but siren sounds, valet code, remote and crank time manually.
How do yu set the crank time manually, I cant see anything about that in the manual?
Posted By: ringojam
Date Posted: February 11, 2008 at 7:46 PM
Dint know you can set crank times manually? I always use the cliffnet,please more info  ------------- Jamaica home of the worlds fastest man.
Posted By: tedmond
Date Posted: February 12, 2008 at 2:51 PM
ringojam wrote:
Dint know you can set crank times manually? I always use the cliffnet,please more info
i think you misread howies post. he usually does everything manually BUT siren sound, crank time, valet and remote with the bitwriter or cliffnet.
Posted By: tedmond
Date Posted: February 13, 2008 at 6:06 PM
heres some updated info ppl. since howie cant get on to 12volt cuz his ISP is supeeer wacked up, he kindly asked if i could post this information. this is C/P from his email message: yes I get internet on the train, in the car etc but by God it's slow, too slow in fact to get on to the 12volt forum so please, please place a joint post telling all those who didn't understand me or "listen to what I'm saying", YOU MUST USE CLIFFNET WIZ FOR CRANK SETTINGS (BUT TRY IT WITHOUT ALTERING IT IF YOU HAVE A POST 90'S CAR WITH GOOD INJECTION THAT STARTS ON THE BUTTON WITH NO TRANSPONDER ) ALSO IT'S EASIER TO CHANGE VALET CODES AND SIREN SETTINGS. MANUALLY SET TACH LAST OTHERWISE THE TACH SETTING WILL BE ERASED WHEN YOU GO BACK TO THE WIZ! That's it Regards H.
|