2007 chevy equinox 561t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100239
Printed Date: May 13, 2024 at 10:45 PM
Topic: 2007 chevy equinox 561t
Posted By: wsc75
Subject: 2007 chevy equinox 561t
Date Posted: December 19, 2007 at 11:22 PM
I just installed a Valet 561t module in a 2007 Chevy Equinox Using an Omega PK3 bypass plus kit. It activates everything but never cranks the car, I did shutdown diagnostics and it flashes 4 times. what does this mean? If I run a jumper wire from the starter relay under the hood to the starter wire at the BCM it works.
Replies:
Posted By: xxajohnsonxx
Date Posted: December 19, 2007 at 11:40 PM
i did an equinox the other day and had the same problem
if i remember correctly the second accessory wire was causing the problem because when i unhooked it, the car starter fine, try cutting out the 2nd accessory connection and remote starting it, if that doesnt work, its not gonna damamge anything anyways, so its worth a shot
Posted By: wsc75
Date Posted: December 20, 2007 at 1:43 AM
Ill try that when I get into work, thanks
Posted By: xxajohnsonxx
Date Posted: December 20, 2007 at 6:50 PM
so did it end up working?
Posted By: wsc75
Date Posted: January 03, 2008 at 8:07 PM
Oh I never had it hooked up in the first place, but I narrowed it down to a defective PK3 bypass module. I got a new one from my dealer and installed it...its been working perfect ever since. Thanks alot for the response though.
|