2004 nissan maxima

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100243
Printed Date: May 11, 2025 at 1:42 AM

Topic: 2004 nissan maxima

Posted By: Velocity Motors
Subject: 2004 nissan maxima
Date Posted: December 20, 2007 at 12:26 AM

Does anyone remember the pinouts for the BCM where you can add pins to control door locks and OEM alarm/arm ? I really don't want to go into the doors for this. Thanks

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Replies:

Posted By: Twelvoltz
Date Posted: December 20, 2007 at 6:47 AM

I take no credit for this, it is stolen from Chris Luongo's post on another forum. Here is a link to the original thread: click.

Chris Luongo in another forum wrote:

Pin 14: one pulse disarms and turns on the domelight. A second pulse unlocks all the doors.

Pin 11: A full, one-second pulse locks the doors and arms the factory alarm. Read the special note above about pin 11; the product you're installing must have a 1-second doorlock pulse. Some products put out a .8 second pulse; I'm not sure how that will work.

Pin 13: Usually does lock/arm with one pulse, but on that particular car, it didn't seem to want to work.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: KarTuneMan
Date Posted: December 20, 2007 at 9:43 AM

Doesn't Compustar have any modules that will control the locks (i-datalink?)

-------------

Posted By: tedmond
Date Posted: December 20, 2007 at 10:09 AM

im sure idatalink has units for models up to 04 only. tried to look for a module for 05, they siad it wasnt available. and yes im sure datalink would take care of everything.