Print Page | Close Window

program 479v remote on viper 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100308
Printed Date: May 28, 2024 at 7:59 PM


Topic: program 479v remote on viper 791xv

Posted By: hansott
Subject: program 479v remote on viper 791xv
Date Posted: December 21, 2007 at 7:47 PM

I am trying to program an extra 479v remote to my viper 791xv alarm.  I have read several times the manual and i know the procedure.  What i don't understand is how actually setting it up for channel 1?  As i understand channel 1 is Auto Learn Standard Configuration, meaning i don't have to program each button individually, right?  Now something which i don't find in the manual is if i want to program channel 1, which button on the remote should I use? 

Thanks for any type of help in advance.

P.S.:  There is a note in the manual which says: "If adding a remote, a button must be tought to the unit in the channel one or channel five position prior to programming other channels"   ( what does this mean?)




Replies:

Posted By: yenersecurity
Date Posted: December 22, 2007 at 3:28 AM

?????




Posted By: hansott
Date Posted: December 22, 2007 at 12:37 PM

Hey I got it to work by reading other posts.  I did everything what the manual said for programing on channel 1 plus push the arm button on the remote when needed.





Print Page | Close Window