Print Page | Close Window

autostart sl 300 not programing?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100333
Printed Date: May 19, 2024 at 1:21 AM


Topic: autostart sl 300 not programing?

Posted By: jl.w7
Subject: autostart sl 300 not programing?
Date Posted: December 23, 2007 at 12:09 AM

hey, i have a autostart SL 300 ( I think thats the model) wont program or siren wont work or parkk light flash? need help!

-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier



Replies:

Posted By: jl.w7
Date Posted: December 23, 2007 at 12:41 AM
sorry, its a ASL 300

-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier




Posted By: Velocity Motors
Date Posted: December 23, 2007 at 12:52 AM
Is this new ? If so, get a new CPU. I had a bad CPU out of the box last week and had to get a new CPU. Once I had it it programmed within the first try.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: jl.w7
Date Posted: December 23, 2007 at 12:58 AM
just bought it today. How big of a chance is it that its a bad CPU?

-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier




Posted By: Velocity Motors
Date Posted: December 23, 2007 at 1:04 AM
Mine was brand new out of the box aswell. I know it wasn't my wiring cause with the new CPU it programmed right away and also installe dit into a 2005 Ford F150 and I've done 20 of those trucks already this season so I know that it wasn't my wiring.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: jl.w7
Date Posted: December 23, 2007 at 1:13 AM
OK now, mines in a 1982 chevy cavalier ( dont laugh, I just need to protect my subs lol) I have no power door locks, no factory security, no nothing. So I hooked up my power, ignition, acc, ground all that. is there anything else that i need to hook up? Another thing is my park lights. Icant figure out where to hook up the input and output. thx

-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier




Posted By: Velocity Motors
Date Posted: December 23, 2007 at 1:23 AM
You need to hook up the hood pin in order to program the remote controls and options do you not ? Also, the RS versions also need the brake switch as well.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: jl.w7
Date Posted: December 23, 2007 at 1:35 AM

yup, I have the hood pin hooked up. umm I dunno bout the brake switch though.



-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier




Posted By: jl.w7
Date Posted: December 23, 2007 at 1:42 AM
Why would the siren not be working though? Do I have to hook up the siren AND horn wire to the siren? I remember reading something about needin high out put for the siren.

-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier




Posted By: tedmond
Date Posted: December 23, 2007 at 9:45 AM
do not connect horn and siren wire together. If you do, u might see lovely fireworks in your can and lots of smokee - dead brain. meter you siren output with a DMM. ground black and connect red to your siren wire. see if it reads 12v when u open the door(armed). as for high current output, most units have internal relays to do this. maybe it could be your siren. try touching neg and pos to the battery terminals and see if it wails.




Posted By: jl.w7
Date Posted: December 23, 2007 at 11:33 AM
ok thx ill try that.

-------------
MECP Certified
(2)Infinity 3.5" 3012CF
(2)Infinity 6x9 9612I
(1)Sony CDXGT710
(2)MTX TC510 and,
A load of dynamat!
1982 Chevy Cavalier





Print Page | Close Window