compustar p2wsh aux settings

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100357
Printed Date: May 18, 2024 at 9:14 AM

Topic: compustar p2wsh aux settings

Posted By: bn880
Subject: compustar p2wsh aux settings
Date Posted: December 23, 2007 at 5:58 PM

Hi all, I've been getting some good help on here lately and I have yet another question;

The CompuStar P2WSH specifies in it's manual that the AUX settings can only be set to a pinout using an OP500 remote/programmer (special options group). Is this so? No other way to hack away at those settings?

If there isn't, who knows of a reasonable installer in Ottawa Canada that might change a few of the special options for a low fee? posted_image

Thanks

Replies:

Posted By: KarTuneMan
Date Posted: December 23, 2007 at 10:13 PM

How did you get your hands on a Compustar pro?

And yes... you need the programmer!

-------------

Posted By: bn880
Date Posted: December 25, 2007 at 9:27 AM

I got it in exchange for about $250. :p

Dang money suckers, a separate programmer for AUX... crazy.

Posted By: tedmond
Date Posted: December 25, 2007 at 11:31 AM

OP500 is the programming bitwriter. you need that set/change the option of the aux from timed, latched, pulse, etc. As for an installer, check the FIND INSTALLERS tab and search up where you live. maybe there is an authorized dealer there. As for the compustart P2WSH, if u got it for 250, that is one good deal. Any idea where that guy got the PRO from? because compustar units (PRO) series are hard to find out on the market. there are P2W900FM, that is easy to find, but P2WSSR is the king.

Print Page | Close Window