2008 mercury sable, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100424
Printed Date: May 17, 2024 at 7:16 AM

Topic: 2008 mercury sable, remote start

Posted By: disturbed845
Subject: 2008 mercury sable, remote start
Date Posted: December 25, 2007 at 8:04 PM

I'm installing a remote start in a 2008 mecury sable using the key overide sl2 module from crimestopper. The only issue i can see is removing the steering column cover to acess the wiring for the bypass module. I removed the three screws from the underside of the cover but what i was wondering is if there is a trick to releasing the plastic tabs on the cover without breaking them. I have tried everyting but it seems like they don't want to release

Replies:

Posted By: Velocity Motors
Date Posted: December 25, 2007 at 11:47 PM

Either push really hard above or below the seam. This will release the tabs from their locking position on the opposing side of the plastic.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window