dei 1700g manual
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100426
Printed Date: July 13, 2025 at 11:14 PM
Topic: dei 1700g manual
Posted By: gixxerboyz
Subject: dei 1700g manual
Date Posted: December 25, 2007 at 8:35 PM
i am looking for a manual for 1700G bypass module. I put a RS in a 2002 Chevy Silverado and the factory alarm is being triggered. Any help will be greatly appreciated. Thx in advance
Replies:
Posted By: Twelvoltz
Date Posted: December 25, 2007 at 8:44 PM
The 1700G does not disarm the factory alarm on the 02 model GM trucks. It does bypass the passlock but does not do door locks nor disarm. Take a look at the BCM, light green wire, purple plug. This is your FAD, to verify you are on the right wire put your meter on it and turn the key in the driver's door to unlock. The wire should go to ground when unlocking and return to it's previous state. Put your system's FAD negative output to this wire, should solve your problem.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: gixxerboyz
Date Posted: December 25, 2007 at 8:48 PM
thx I will try that. lil bro was a lil upset his X-mas present was jacked up. you guys are excellent on here. I cant say enuf about the help I have recieved on this forum
Posted By: mrvil
Date Posted: January 07, 2008 at 9:57 PM
hi, i'm working on a1998 caddy seville sts and I can't get the 1700g to work with the passkey. i have tried using the pink and pink/black wire to the pink but it wouldn't work. I've tried resisters too. Iv've been on this for almost a week. Some help would be good right now
|