2005 taurus after market keyless entry
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100459
Printed Date: May 13, 2025 at 9:38 PM
Topic: 2005 taurus after market keyless entry
Posted By: danboy
Subject: 2005 taurus after market keyless entry
Date Posted: December 26, 2007 at 11:09 PM
I am trying to intall a keyless entry on a 2005 taurus. It was a hertz car and did not come with factory system. I checked to see if it had factory setup by cycleing the key on off six times. It did not respond with the locking of the doors. I got a system to work but not all the time. I read on this site that my gem goes to sleep after a few minutes and won't let the keyless work properly. I tried putting my car in program mode to turn this off but I can't make it work I tried door closed and door open. When I get to the part where the horn honks I don't get a honk. Anyone have some ideas how to make this work. I also read somewhere the car has factory keyless if it has sticker that reads A-1 on the driver door post between the hindges. Mine has the sticker but will not program for remotes. Any ideas Dan
Replies:
Posted By: another-kelly
Date Posted: December 26, 2007 at 11:32 PM
if the aftermarket unit has it, connect the domelight supervision.
Posted By: tedmond
Date Posted: December 27, 2007 at 8:04 AM
you will have to pulse the BCM to wake it up. after 10 min or so, the BCM goes to a sleep mode to conserve battery life. as kelly mentioned, connecting a domelight should pulse the BCM to wake up, then u can unlock or lock since domelight comes on first before unlock occurs.
Posted By: mikvot
Date Posted: December 27, 2007 at 5:04 PM
|