00 jetta remote start, security system?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100474
Printed Date: May 21, 2024 at 1:03 PM
Topic: 00 jetta remote start, security system?
Posted By: deltadmx
Subject: 00 jetta remote start, security system?
Date Posted: December 27, 2007 at 12:06 PM
Hey guys,
Long time spectator, but first time posting here. I have a question for you guys, any help is appreciated. I just installed an Audiovox 1 button remote start system. No keyless entry, no security, no nothing, just a one button system was installed. Today (it was installed last week) I get a call saying all of a sudden the factory security system is going off every time she tries to remote start and the car shuts off. Any ideas going on here? The car is cranking but thats all it does while the factory security is going off. Granted I did not touch the factory security system at all during the remote start installation. It was my first remote start ever on a VW so it was a learning experience for me. It did require the basic universal bypass module to be installed and that went in with no problems at all.
Here is the model remote start that was installed:
https://www.sears.com/shc/s/p_10153_12605_05733729000P?keyword=remote+start
Now I probably made a n00bie mistake most likely, this is only my fifth remote start that I have installed so far so any advice on where to go from here would be much appreciated!
Thanks guys!
Replies:
Posted By: deltadmx
Date Posted: December 27, 2007 at 12:14 PM
O did use the wire printout from here and Audiovox as well. The actually remote start system only has 1 wire that is relevant to the factory security system. This site labels the disarm wire as "Factory Disarm w/Locks Need 2 Pulse to Unlock Doors" Any idea on a location for this, assuming this is my problem?
Posted By: deltadmx
Date Posted: December 27, 2007 at 1:01 PM
please close, i am an idiot... after some thorough reading i found the problem, thanks
|