Rattler Led install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10049
Printed Date: August 19, 2025 at 12:54 AM
Topic: Rattler Led install
Posted By: Anthony1
Subject: Rattler Led install
Date Posted: February 25, 2003 at 6:04 AM
hi there, I hooked up the led scanner, Just went off the wire harness of the rattler 300, know I was wondering do I have to fuse the scanner? If so what size fuse. another question after I had the alarm installed by Krazy Krazy , I asked where the valley switch was, I was told they do not install them because the alarm could be shut off by thiefs, but I think the alarm came with one. I never seen the contents off the box, but I read on the internet that a valley was included. Does anyone know if this is true. So I can question Krazy Krazy?
Replies:
Posted By: idrdnk
Date Posted: February 25, 2003 at 8:55 PM
Your led shouldn't need a fuse. That led is just a visual aid to tell you the status of your alarm ( armed or not armed). It does come with a valet switch. I just installed the same alarm last week in my truck. I have a copy of all the contents that came in the original box from the instruction book. If you would like me to e-mail you a copy of this, e-mail me with your e-mail address at jnkml230@cableone.net
|