viper 5900, chevrolet equinox

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100515
Printed Date: May 15, 2025 at 8:22 AM

Topic: viper 5900, chevrolet equinox

Posted By: svanloo
Subject: viper 5900, chevrolet equinox
Date Posted: December 28, 2007 at 1:46 PM

my unit does not respond to the remote start command when I'm in range.
When I'm out range it show the transmitter attempting to receive the signal.As a result my remote start does not work. Alarm feature work find. Anyone know how to program passive arming without a bit writer or what may cause my remote feature not to work.

-------------
Sure Nuff

Replies:

Posted By: Twelvoltz
Date Posted: December 28, 2007 at 4:11 PM

Install manual for your system can be found: here. It explains in detail how to get into and change programming options (like passive arming).

Is the override toggle in the on position?

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: svanloo
Date Posted: January 02, 2008 at 11:41 PM

thanks maybe I overlooked that.

-------------
Sure Nuff

Posted By: svanloo
Date Posted: January 06, 2008 at 2:55 AM

Thanks for the acknowledgement. Oh my system works great now.
I solved my issue with the start. LIL heads up is Ground the natural safety wire. This to me wasn't mention in the installation manual. So anyone have this same issue double check that wire.
It makes the difference between the transponder responding or not

-------------
Sure Nuff

Print Page | Close Window