ultra 2250 rs and alarm start kill

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100519
Printed Date: June 11, 2024 at 4:40 AM

Topic: ultra 2250 rs and alarm start kill

Posted By: window
Subject: ultra 2250 rs and alarm start kill
Date Posted: December 28, 2007 at 5:49 PM

i'm using this ultra 2250 on a 2000 nissan maxima my issue is the groud while running output it only has one that is programable for start kill but i need it to run the transponder box is there any other wire i can use for start kill relay

Replies:

Posted By: 519civiconair
Date Posted: December 28, 2007 at 6:03 PM

if the GWR is 500ma diode to each starter kill and transpoder box if its only 200-250ma relay as follows pin 86 gwr 85 fused +12v pin 87 Ground and pin30 diode to each only need 1 GWR to run both its just how strong the output is........ a relay only needs about 150ma to activate hope this helps

-------------
F.B.S.S air ride is the only way to roll

Print Page | Close Window