omega mars 10 problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100574
Printed Date: May 06, 2024 at 1:22 PM
Topic: omega mars 10 problem
Posted By: SoundFX411
Subject: omega mars 10 problem
Date Posted: December 30, 2007 at 1:04 PM
I installed this unit in a 2007 Nissan Versa and have 2 problems. 1st problem: I can't seem to find the wire to activate for the factory remote. All I found is the wire that is operated by the switch. 2nd problem: When I try to remote start I get 3 clicks from the brain and no start.I'm using the tachless method. I even tried using the tach method and no change. Any Help Please.
Thank You
-------------
SoundFX
Replies:
Posted By: Twelvoltz
Date Posted: December 30, 2007 at 3:04 PM
I am not really familiar with the Omega line, but I can not find a reference to a Mars 10 on their site.
If you are looking for a way to activate the remote start using a factory remote, I always use the lock leg of the driver's door lock actuator to activate the DEI systems I install. If your system does not offer a positive activation input you would need to use a relay.
Does the manual make any reference to what 3 'clicks' means? Is it flashing the parking lights 3 times with these clicks?
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: SoundFX411
Date Posted: December 30, 2007 at 4:02 PM
I finally got it to start but it won't stay running. I put the key in the ignition and no good. I found that it has something to do with the adjustments because I even went to the tach wire and the same thing. If I adjust them too much I get no activation. If I adjust them less sensitive, it starts but doesn't stay running.
-------------
SoundFX
|