2002 dodge stratus remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100590
Printed Date: June 01, 2024 at 12:15 PM
Topic: 2002 dodge stratus remote start
Posted By: jankyrob
Subject: 2002 dodge stratus remote start
Date Posted: December 30, 2007 at 6:04 PM
I installed a bulldog deluxe 500 remote start and when I plugged the harness in the module it did nothing. According to what read in the forums I have double checked the wiring and seems ok. I cannot get the led to blink or horn to honk. Any help will be helpful.
Thanx
Replies:
Posted By: Velocity Motors
Date Posted: December 30, 2007 at 6:57 PM
Where did you ground the system ? On the Dodge you have to ground to the frame not to the part of the dash that's part of the lower dash shroud.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: jankyrob
Date Posted: December 30, 2007 at 9:36 PM
I will try this in the morning. I believe I grounded the wires to the dash were there was bare metal. I thought this would be a suitable place. Please let me know if this would be ok? Thanx for the very fast reply
Posted By: Chris Luongo
Date Posted: December 31, 2007 at 11:42 AM
Double-checked how? Visually, or by testing the wires?
The best way would be to go right to all the harnesses going into the brain, and test all of the wires right there, for proper function.
Posted By: jankyrob
Date Posted: December 31, 2007 at 1:10 PM
I checked at the harness and at the brain. I was looking at the manual and I believe I did not connect the 12 volt red wire @ the h2 harness. I thought it would be for the lights only. Let me hook this up and see what happens.
Thanx for the reply
Posted By: jankyrob
Date Posted: January 01, 2008 at 3:09 PM
Okay I connected the other red wire on the h2 harness and grounded the cut portion like the manual told me and nothing happens. The led's do not blink and the horn does nothing. The book told me to turn the car to on three times and on the third time to leave it on the on position the press the program button (nothing). Any suggestions?
|